Classification of Water Soluble Cutting Fluids

_A: Emulsion: Its main components are mineral oil, fatty acid, emulsifier, rust inhibitor, defoamer and so on.

_B: Semi-synthetic: Its main components are mineral oil, fatty acid, extreme pressure agent, surfactant, antirust agent, etc.

_C: Total synthesis: Its main components are surfactants, amino alcohols, antirust agents, etc.

The difference between water-soluble cutting fluid and water-soluble cutting fluid

_Total synthetic cutting fluid is not the same as mineral oil. Semi-synthetic cutting fluid contains a small amount of mineral oil (5-30%) while emulsified cutting fluid contains a large amount of mineral oil (50-80%).

Performance

_l, does not contain harmful substances such as sodium nitrite, chloride, phenol and so on, which meets the environmental protection requirements of the latest EU RoHS Directive.

_2. It has superior extreme pressure and good defoaming and rust resistance.

_3. Good stability. The product can be naturally restored to its original state under greenhouse after freezing to solid at minus 30 C. The storage period is more than one year.

Application of Water Soluble Cutting Fluid

Water-soluble cutting fluid is suitable for cutting steel, cast iron, stainless steel, copper and aluminum and their alloys with long service life. Water-soluble cutting fluid is widely used in large processing centers and automatic lathes.

Water Soluble Cutting Fluid-Water Soluble Cutting Fluid Reference Formula

Chinese style

Component Name Feeding Volume (g/L)

Base oil 10-25

Petroleum sulfonates 5-15

Fatty acids 5-12

Triethanolamine 5-8

NP-10 15～30

NP-1015-30

Chlorinated paraffins 0-5

Isobutylene sulfide 0-5

Sodium nitrite 10-20

Polyols 0-10

Non-ferrous metal rust inhibitor < 0.5

Antifungal agent 0~1

Defoamer 0~1

Water allowance

Chinese style

Component Name Feeding Volume (g/L)

Base oil 20-30

Sodium petroleum sulfonate 1-5

Triethanolamine 1-5

Methyl oleate 5-10

9610A Emulsifier 20-30

Broad-spectrum fungicides 1~3

Stabilizers 1~3

Defoamer 0~1

Water allowance

Chinese style

Ten Advantages of Water Soluble Cutting Fluid-Water Soluble Cutting Fluid

_. Excellent anti-rust performance (anti-rust time more than three months). The solution is green and transparent, and has good visibility. It is especially suitable for use in modern processing equipment such as CNC machine tools and processing centers. 3. Environmental protection formula: does not contain chlorine, triazine, secondary amines, aromatic hydrocarbons, sodium nitrite and other harmful ingredients to the human body, no irritation to the skin, friendly to the operator. Four. Cutting fluid deterioration and odour control: selected imported additives, highly antibacterial, long life in the central system or single oil tank (over one year without stench) five. Low foam: excellent anti foaming property, it can be used for high pressure system and high air release operation conditions, suitable for soft and hard water. Lubrication: The formula contains unique surfactants and emulsifiers. Lubrication performance is much higher than that of similar products, which can significantly reduce the cost of cutting tools, improve the surface processing accuracy, replace the use of cutting oil, and create a good environment for operators. Seventh, chip settling property: The oil-removing formula of our company has good chip settling property, which provides the rapid settling of cutting chips and cutting subdivision, maintains the system clean and easy to clean and remove pollutants, and oil slick is quickly separated completely on the liquid surface of cutting fluid. 8. Cooling and flushing: Good cooling and cleaning properties, keep machine tools and workpieces clean, reduce sticky residues. High concentration type: water diluted 20-30 times, can be used normally. 10. Low price: The companys cutting fluid from the feed, production, logistics, fine cost control, as far as possible to leave profit margins to customers